IBG eddyliner S
Call for Quote 1-800-545-9729
eddyliner® S – Eddy Current Testers
Hardness, Case Depth, Structure, Tensile Strength
Digital eddy current test instrument for one channel nondestructive testing of metal components, mass produced parts and semi-finished products according to the Preventive Multi-Frequency Technology (PMFT) and Harmonic Analysis. Testing for material properties such as hardness, case depth, structure, tensile strength, heat treatment or alloy.
The eddyliner digital® S distinguishes itself with compact design and concentration on one channel structure applications with one coil at one location combining that with the well-known ibg test reliability and ease of operation. The ergonomic interface facilitates intuitive and simple operation via touch screen. All functions and test results are captured at a glance. And it’s portable eddy current technology.
The eddyliner® is based on the ibg system concept proven for decades. All coils and probes of the ibg system family can be used. The eddyliner® is therefore recommended not only for the solution of new tasks but also as an upgrade for existing installations to be equipped with state-of-the-art eddy current technology.
Digital processing of the measuring signal with special processors immediately after the pre-amplifi er guarantees highly stable test results.
Calibration with ibg’s unique “good-part-only-concept” enables setup within a few minutes true to the motto: “Do you still calibrate or are you already testing?” An adequate number of good parts is recorded as reference parts. From the eddy current signals tolerance zones are automatically generated encompassing the metallurgical magnetic fi ngerprint of the group of good parts for all PMFT test frequencies. After recording of good parts, testing can be immediately started. Faster starting yet more reliable eddy current testing is not possible.
- Tolerance zones
When recording material data the eddyliner® automatically generates elliptical tolerance zones for a reliable test. A tolerance zone editor is integrated for special applications enabling the skilled user to freely define the zones in rectangular or elliptical form.
- Harmonics analysis
In addition to the eight fundamental test frequencies, two harmonics (2nd to 9th harmonic selectable) for each test frequency can be turned on and simultaneously evaluated without increasing the test time.
The ibg multi-colored histogram displays the test results of all reference data. The last 100 bad parts and up to 1,000 good parts can be observed at a glance and evaluated later, an essential function when reference parts are fi rst recorded and afterwards crosschecked in the laboratory. Questionable NG parts, later found to be good, can be added to the reference parts with one keystroke.
- Display of results
Test results are shown as bargraph, single ellipse or multiple ellipses, selectable.
A multitude of encircling coils up to a diameter of 500 mm as well as structure test probes are available for standard applications. Customized coils (i.e. ID coils and rectangular coils) for special applications are designed and manufactured in-house. Test coils may be connected either as ibg recommended compensating pair of coils or as self-compensating single coil. Monitoring of coil and cable failure as well as a 50/60 Hz noise suppression can be activated.
- Activating test
Start of test can be manually at touch screen, via PLC or optional start button. There is an autostart function that detects the part in the test coil and activates testing immediately or after an adjustable delay time.
- Test speed
High speed testing within milliseconds. Using eight test frequencies, a cycle rate up to seven parts per second with encircling coils and 25 parts with probes can be realized with standard settings.
- Part type
100 part types with all settings and reference data can be stored in the device memory and switched over manually or via PLC for automated processes.
- Data storage & transfer
Test results, part types and device settings are stored internally on a robust fl ash memory and can be exported via an USB stick or Ethernet connection. A ring buffer logfi le records all actions and allows fast debugging for service purpose.
- Automation without PLC
Direct control of sorting devices, paint marking systems or indicating lamps is possible with the integrated 24 Vdc (2.5 amps) power supply, providing a low-cost solution for small automated systems without an additional PLC
- Remote control
The eddyliner is remotely operable by every network computer via VNC viewer software.
- Access protection
The instrument provides a multilevel access authorization concept that operates by pin code.
- Help function
The user always has access to a context sensitive help function on the device screen which often renders a look into the manual unnecessary.
Included are: German, English, Spanish, French, Czech, Chinese, Hungary, Italian, Japanese, Korean and Russian. Other languages as option.
Tough 10.2” TFT touch screen, color display, resolution 1,024 x 768 pixel, operable with gloves.